HPC086 Bus Passenger Counting system is a device based on infrared sensor mounted on bus door to count the number of passenger get in or out, data can be stored in SD card or upload to server with real time report, mainly installed at public buses and vehicles.
GPS tracking for real-time location;
GPRS data transmission;
WIFI connection available;
Directional count data;
Open API for integration
Bus passenger counting: In and Out
Power Supply: DC8V – 40V
Vehicle Door Width: 40 cm --130 cm
Vehicle Door Height: 1.8 m --2.4 m
Transmission Type: RS232 or RS485
Transmission Baud Rate: 9600 bps
The Fastest Speed of Passenger Flow: 2.7 m/s
Daily Average Accuracy: >95%
Ambient Temperature: -20 - +65℃
Data upload ways:SD card /GPRS module/wifi module
Integration GPRS software: RS485,232 port interface
The use of HPC086 is beneficial for transit service planning as well as accuracy of reporting. It can be especially helpful in high passenger volume applications like bus rapid transit.
As well as counting passengers as they get on and off buses the counting system can also monitor the real-time location of buses.
1 year quality guarantee for free repair and replace (does not contain intentional Human damage) 24 hours after-sale service support and help.
Free detailed installation instructions
Free V2-485A protocol files for software integration support.
Support WIFI and GPRS module
Q: Can I use my own GPRS module for data transmission?
A: Yes, we provide protocol for integration, or you can send us the device and protocol, we can do the integration freely.
Q: How many sensors needed for a door?
A: It depends on the door width, normally 1pc if within 70cm, 2pcs if between 75-90cm, 3pcs if over 95cm. We will customize the solution depends on the environment of the bus.
Q: What’s the accuracy of this device?
A: Under standard environment, the accuracy is around 85%-92%.
Q: How can I install the device? Do you provide installation guide?
A: We provide the installation accessories and detailed installation manual.